My own MySensors gateway
As earlier posts described, i’m fascinated over the project ”MySensors”. However, I will not replace my setup of the openHAB server and my MQTT-implementation (using RabbitMQ). This ...
MQTT
A DS18B20+ and a Pi
Yesterday, I realized that I actually had one Dallas DS18B20+ OneWire temp sensor laying around and not being used. That piece of electronics together with an almost unused Raspberry Pi would actually...
The first step between Arduino and MQTT
Hi! So – the first step has now been completed. The Arduino Nano is now actually getting it’s data all the way to the MQTT bus. Right now, it’s in a pretty ”rough”/testin...
Lets get dirty!
And so the saga begins. My first Arduino Nano with some sensors just arrivedthe goal is to somehow mqttify these prototypes and use them with openHAB. I will post my progress – good as bad 🙂...
A mid time story
Hello all, Now the system has been running in a semi lab/production environment for a while. The key feature that everything the automation system can or will be controlling must be controllable ̶...
Home Automation – an early case study
The openHAB system has now run integrated with the alarm for a couple of days, and I must say it works really well. I’ve also changed how the connection process between the Visonic alarm an my M...
PiFace as a scene controller
Now is the first ”quick and dirty” solution based on the PiFace CAD in test phase. Together with the MQTT bus, openHAB and peripherals hooked up using Z-Wave or 433MHz solution, we now hav...
Visonic PowerMax alarm and mqtt/openHAB
And so came the breakthrough! Finally my Delphi-hacking led to that the PowerMax Complete tells the mqtt-bus in RabbitMQ about how it feels and what’s going on. What i’m looking for is of ...